Andrew Hazelden's Blog

Yesterday my family discovered a buried WW2 sea mine in the garden of our cottage near the ocean. From doing a bit of research on the internet the rusted sea mine looks a bit like a British MK14 Naval Mine. If anyone has more knowledge on naval mines, I would love to hear from you. The sea mine is hollow on the inside and quite rusted. I photographed the sea mine using my Canon Powershot camera and took two photos hand-held to try and later create a stereoscopic phantogram. The pictures below are meant to be viewed with red / cyan 3D glasses.

I used Apple Shake to prepare the phantogram and have recently devised a script that uses a series of nodes for handling anaglyph stereoscopic compositing that lets you line up stereo photos and register them properly. I used two corner-pin nodes to align the ground plane to create the phantogram. The Shake script ends with a move3D node to create a real-time phantogram -45° degree simulated viewing angle. Shake also has a region of interest feature called the DOD – “Domain of Definition” that can let you tune a specific part of the image in real-time at 4K resolution.

WW2 Sea Mine - Stereoscopic Red / Cyan Anaglyph

(more…)

This is a Phantogram of hamburgers cooking on a BBQ grill. You should view these stereoscopic anaglyph images with red / cyan glasses. On the Phantogram image the grill surface is set to have zero depth, the hamburgers pop-up and the BBQ briquettes sink downwards. The hamburger patties had their depth enhanced in Apple Shake to make them “pop” even more off the page.

BBQ Hamburgers Phantogram Preview

(more…)

Canon D60 Phantogram Preview

This is a Phantogram of a Canon EOS D60 DSLR Camera. Use Red / Cyan 3d Glasses to view it. The photos were taken with a stereo separation of 1 cm. The stereoscopic images were processed in Apple Shake.

(more…)

This is a Phantogram of a Canon Powershot SD400 camera. Red / Cyan 3D glasses are required to view this stereoscopic image.  I think that this is my best Phantogram to date, and I am really happy with it. I processed the images in Apple Shake. I have now decided to show a preview of the printed Phantograms so people can see what they look like before they print them.

Canon SD400 Phantogram Anaglyph Preview

(more…)

This is a set of stereoscopic 3D images of an antique spinning wheel. The first image is a regular anaglyph image that you can view with your red / cyan 3d glasses. The 2nd image is a phantogram image which is best viewed printed off on a 5×7 piece of paper at a 45° angle or on a device where you can set the screen flat like an iPad.

Spinning Wheel Anaglyph Image - Click for a higher resolution version.

(more…)

Printed SGI O2 Phantogram image

Today I created a printable phantogram image of my SGI O2 computer. A phantogram is an anaglyph stereoscopic image that tries to pop-up off the page when viewed from about 16 inches away at a 45° degree angle. It is viewed with red / cyan glasses. It is best experienced printed off in color on letter sized photo paper. If you have an Apple iPad, I would love to hear from you on how it looks.

I prepared the phantogram image in Apple Shake using two cornerpin nodes to make a perspectival anamorphosis from the left and right images.

(more…)